CNC, CNC Controller, Pulse Output CNC, Analog Voltage Output CNC, Hust CNC in India.

Hust CNC CONTROLLERS

H2PN-1 with Pulse Output

  H2PN

Specifications   

Manufacture : Hust
RoHS: Detail
Screen Designing: Yes
comm.,: RS232
Memory: 512KB
MPG: Optional
Input signal Type: NPN
I/O Interface Expansion: No
I/O Interface On board: 28/20
Output Command: Pulse
Display: 5.7 Mono
No.of Axis: 1
Input Supply: 230V AC

Features

  • 10.4" TFT colour, 5.7” colour screen and  5.7” monochrome display
  • Inbuilt I/O 24/16, Expandable I/O Up to 64/64
  • Graphical Simulation
  • Axis : up to 8 axis
  • High Speed Machining : 32 +32 bits Two Microprocessor.
  • Micro Meter resolution
  • Control Axis : Eight axes - X, Y, Z, A, B, C, U, V
  • Voltage-control servo system, maximum response rate with up to 1 million pulses (500 KPPS)
  • at the rate of 60m/min.
  • High speed zDNC function : Exclusive high speed buffer serial zDNC interface with 57600 Baud
  • rate is connected with the computer.
  • USB disk for high Speed machining
  • 400 Look Ahead blocks
  • Support CAD/CAM and transmitted via RS232C interface
  • Freely configure keyboard
  • Simultaneous feedback of the roller and passive encoder, and cross reference
  • Memory capacity for the CNC Mainboard – 512KB
  • A battery backup system is provided for CNC program storage after power-off
  • Backlash compensation
  • Step Pitch error compensation - 10 segment & 8 point for each segment
  • Provide six work coordinate systems for your convenience during program designing and
  • workpiece machining
  • Provide 40 sets of tool offset compensation settings
  • Customized Program Group [MACRO] Command
  • Tool feed rate can be set to mm/minute or mm/revolution
  • Non-Stop Mode between blocks
  • Close Loop Analog voltage output or High Speed Pulse output.
  • Optional Skip function

H2PN-1
send enquiry for Hust CNC CONTROLLERS

H2PN-T with Pulse Output

H2PN-T 

Specifications 
 

Manufacturer : Hust
RoHS: Detail
Macro Commands: Yes
comm.,: RS232
Memory: 512KB
MPG: Optional
Input signal Type: NPN
I/O Interface Expansion: No
I/O Interface On board: 28/20
Output Command: Pulse
Display: 5.7 Mono
No.of Axis: 2 - 1
Input Supply: 230V AC


Features

  • 10.4" TFT colour, 5.7” colour screen and  5.7” monochrome display
  • Inbuilt I/O 24/16, Expandable I/O Up to 64/64
  • Graphical Simulation
  • Axis : up to 8 axis
  • High Speed Machining : 32 +32 bits Two Microprocessor.
  • Micro Meter resolution
  • Control Axis : Eight axes - X, Y, Z, A, B, C, U, V
  • Voltage-control servo system, maximum response rate with up to 1 million pulses (500 KPPS) at the rate of 60m/min.
  • High speed zDNC function : Exclusive high speed buffer serial zDNC interface with 57600 Baud  rate is connected with the computer.
  • USB disk for high Speed machining
  • 400 Look Ahead blocks
  • Support CAD/CAM and transmitted via RS232C interface
  • Freely configure keyboard
  • Simultaneous feedback of the roller and passive encoder, and cross reference
  • Memory capacity for the CNC Mainboard – 512KB
  • A battery backup system is provided for CNC program storage after power-off
  • Backlash compensation
  • Step Pitch error compensation - 10 segment & 8 point for each segment
  • Provide six work coordinate systems for your convenience during program designing and  workpiece machining
  • Provide 40 sets of tool offset compensation settings
  • Customized Program Group [MACRO] Command
  • Tool feed rate can be set to mm/minute or mm/revolution
  • Non-Stop Mode between blocks
  • Close Loop Analog voltage output or High Speed Pulse output.
  • Optional Skip function

H2PN-1
send enquiry for Hust CNC CONTROLLERS

H4C-T with Analog Voltage Output

  H4C-M

  Specifications
 

Manufacturer : Hust
RoHS:
Macro Commands: Yes
comm.,: RS232
Memory: 512KB
MPG: Optional
Input signal Type: NPN
I/O Interface Expansion: 32/32
I/O Interface On board: 24/16
Output Command: Analog Voltage
Display: 5.7
No.of Axis: 2 plus 1
Input Supply: 230V AC
   

H2PN-1
send enquiry for Hust CNC CONTROLLERS

H4P-M with Pulse Output

 H4P-M-&-T 

Specifications
 

Manufacturer : Hust
RoHS: Detail
Macro Commands: Yes
comm.,: RS232
Memory: 512KB
MPG: Optional
Input signal Type: NPN
I/O Interface Expansion: 32/32
I/O Interface On board: 24/16
Encoder Feed Back: No
Output Command: Pulse
Display: 5.7 Mono
No.of Axis: 3 - 1
Input Supply: 230V AC


Features  

  • 10.4" TFT colour, 5.7” colour screen and  5.7” monochrome display
  • Inbuilt I/O 24/16, Expandable I/O Up to 64/64
  • Graphical Simulation
  • Axis : up to 8 axis
  • High Speed Machining : 32 +32 bits Two Microprocessor.
  • Micro Meter resolution
  • Control Axis : Eight axes - X, Y, Z, A, B, C, U, V
  • Voltage-control servo system, maximum response rate with up to 1 million pulses (500 KPPS) at the rate of 60m/min.
  • High speed zDNC function : Exclusive high speed buffer serial zDNC interface with 57600 Baud rate is connected with the computer.
  • USB disk for high Speed machining
  • 400 Look Ahead blocks
  • Support CAD/CAM and transmitted via RS232C interface
  • Freely configure keyboard
  • Simultaneous feedback of the roller and passive encoder, and cross reference
  • Memory capacity for the CNC Mainboard – 512KB
  • A battery backup system is provided for CNC program storage after power-off
  • Backlash compensation
  • Step Pitch error compensation - 10 segment & 8 point for each segment
  • Provide six work coordinate systems for your convenience during program designing and workpiece machining
  • Provide 40 sets of tool offset compensation settings
  • Customized Program Group [MACRO] Command
  • Tool feed rate can be set to mm/minute or mm/revolution
  • Non-Stop Mode between blocks
  • Close Loop Analog voltage output or High Speed Pulse output.
  • Optional Skip function

H2PN-1send enquiry for Hust CNC CONTROLLERS


H4P-T with Pulse Output

H4P-M-&-T 

Specifications
 

Manufacturer : Hust
RoHS: Detail
comm.,: RS232
USB: Yes
Memory: 512KB
MPG: Optional
Input signal Type: NPN
I/O Interface Expansion: 32/32
I/O Interface On board: 24/16
Encoder Feed Back: No
Output Command: Pulse
Display: 5.7 Mono
No.of Axis: 2 - 1
Input Supply: 230V AC


  Features  

  • 10.4" TFT colour, 5.7” colour screen and  5.7” monochrome display
  • Inbuilt I/O 24/16, Expandable I/O Up to 64/64
  • Graphical Simulation
  • Axis : up to 8 axis
  • High Speed Machining : 32 +32 bits Two Microprocessor.
  • Micro Meter resolution
  • Control Axis : Eight axes - X, Y, Z, A, B, C, U, V
  • Voltage-control servo system, maximum response rate with up to 1 million pulses (500 KPPS) at the rate of 60m/min.
  • High speed zDNC function : Exclusive high speed buffer serial zDNC interface with 57600 Baudrate is connected with the computer.
  • USB disk for high Speed machining
  • 400 Look Ahead blocks
  • Support CAD/CAM and transmitted via RS232C interface
  • Freely configure keyboard
  • Simultaneous feedback of the roller and passive encoder, and cross reference
  • Memory capacity for the CNC Mainboard – 512KB
  • A battery backup system is provided for CNC program storage after power-off
  • Backlash compensation
  • Step Pitch error compensation - 10 segment & 8 point for each segment
  • Provide six work coordinate systems for your convenience during program designing and workpiece machining
  • Provide 40 sets of tool offset compensation settings
  • Customized Program Group [MACRO] Command
  • Tool feed rate can be set to mm/minute or mm/revolution
  • Non-Stop Mode between blocks
  • Close Loop Analog voltage output or High Speed Pulse output.
  • Optional Skip function

H2PN-1
send enquiry for Hust CNC CONTROLLERS

Our Product Range

PANASONIC MADE SERVO
PANASONIC GEAR / BLDC
control panels