Encoders, Encoder Drive, Delta Encoder Drives in India.

Delta Encoder Drives

ROE-E Series - Incremental Type (Solid Shaft, Hollow Shaft, Through Hole Shaft)

ROE-EFeatures
ROE-E Series is an angle-measuring sensor device which is used to detect angular velocity. It can convert the angular velocity that is input into the shaft to the corresponding pulse numbers following optical communication principle. Small size, high precision and reliable performance are its features. ROE-E Series is usually used for detecting speed, rotation direction and angular displacement. ES(Solid Shaft)EH(Hollow Shaft)ET(Through Hole Shaft)
Specifications :

  • ES Series: Outer Diameter of Solid Shaft: 36.6mm; Outer Diameter of Solid Shaft: 50mm
  • EH Series: Outer Diameter of Hollow Shaft: 36.6mm; Outer Diameter of Hollow Shaft: 38.7mm;
  • Outer Diameter of Hollow Shaft: 50mm
  • ET Series: Outer Diameter of Through Hole Shaft: 100mm 
  • Light and compact. High reliability. Incremental Encoder. It will not increase the load of the mechanical system. 
  • Resolution: 100-5000ppr 
  • Output Form: Open Collector, Voltage Output, Line Driver, Push Pull 
  • Power Voltage Range: 5-24V 
  • Responsiveness: 300kHz max

Photoelectric Sensors

send enquiry for delta encoders

ROE-A Series - Absolute Type (Solid Shaft, Hollow Shaft)

roe-a Features :

ROE-A series is an absolute encoder that uses Gray Code and reports the shaft angle within a 360oC range. As compared with other type of encoder, it can remember the position according to the mechanical position of the encoder. It means that the absolute position can be found and memorized without searching reference point. AS(Solid Shaft)AH(Hollow Shaft)

Specifications :
  • AS Series: Outer Diameter of Solid Shaft: 50mm
  • AH Series: Outer Diameter of Hollow Shaft: 50mm
  • Absolute Encoder (Gray Code)
  • Resolution: 5-10Bit
  • Output Form: Voltage Output, Open Collector
  • Power Voltage Range: 5-12V
  • Responsiveness: 20kHz max

Photoelectric Sensorssend enquiry for delta encoders

 

ROE-M Series - Commutation Type for Servo Motor

roe-m 

Photoelectric Sensorssend enquiry for delta encoders

ROE-C Series - Specified Encoder for CNC Machine Tool

roe-c

 Features

To meet the use requirements of encoder for CNC industry, Delta has launched a new encoder product specialized for CNC Machine Tool– CS7 series. For the solution of high resonance and much oil & gas problem occurred in machine tool application, CS7 series not only have the new mechanical design, but also provide high standard electric specifications. The corresponding rotation speed of CS7 series can achieve 8000rpm, and the response frequency of output signal can also reach 300kHZ. This new series product can satisfy the needs of all kinds of CNC machine tools.

Specifications
  • CS Series: Outer Diameter of Solid Shaft: 70mm
  • Resolution: 1024ppr
  • Output Form: Line Driver
  • Power Voltage Range: 7-24V
  • Responsiveness: 300kHz max.
  • IP degree: IP55 & 70°C

Photoelectric Sensors
send enquiry for delta encoders

 

Our Product Range

PANASONIC MADE SERVO
PANASONIC GEAR / BLDC
control panels